Tiếng Việt
The Sices DST4400 is a Sice-specific controller used for certain models and has been discontinued instead the DST4400 controllers have been replaced by Sices GC250 or Sices GC315 controllers with similar function and somewhat more modern. The Sices GC 250 and GC315 are equipped with main engine and generator protection measures such as oil pressure, coolant temperature, frequency, voltage, current, power and fuel level.
| SICES CONTROLLER | INFORMATION |
| Sices DST 4400 Generator Controller | Italy Origin |
| Sices DST4400 Manual pdf | Download |
Sices DST4400 Controller General Information
- TTTT Global is currently a genuine Sices genset controller representative.
- All the functions, controls and signals which are typically available in bigger and expensive devices, are in built in a small dimension controller.
- By means the comfortable key selector switch DST4400 can be used for AMF either Manual gensets.
- The wide range of measures, engine and electrical protections allow the use of DST4400 in a wide range of applications.
- Most important electrical measures are True RMS values; this values alongside the power measures are obtained by means of fast sample acquisition.
- DST4400 controller can be equipped with J1939 interface (as option) that make available a huge number of engine measures, status and diagnostic codes and messages. In addition, J1939 simplifies the engine-panel interface.
- Regarding to the communication interfacing, one serial port RS232 interface with MODBUS protocol is available. As option it can be possible to require an additional serial port RS485 or RS232.
- Sices DST4400 TTTT comprises a real time clock (without back-up supply) and acoustic alarm in order to quickly advice the operator in case of alarm or shutdown.
- DST4400 is a Multilanguage device with several languages available on the LCD display. In detail it’s possible to chose among Italian, English, French, Spanish, German, Portuguese, Russian and Chinese.
- The DST4400 is now discontinued and has been replaced by Sices GC250 and Sices GC315.
- On the TTTT Global site, there are not only Sices DST4400 pdf but also Sices DST4400 manual.
- Sices has stoped production of DST4400 and replaced by Sices GC315 with the same functions
Sices DST4400 Generator Controller Features
- Three-phases AMF automatic genset controller
- True RMS readings on generator voltages and currents
- Additional current measurement for neutral or differential protection (OPTION) Active, Reactive and apparent power measurement
- 8 fully programmable digital input
- Up to 6 programmable digital output
- RS232 interface port with MODBUS RTU protocol
- J1939 and MTU MDEC CAN interface (OPTION)
- Real Time Clock
- Engine speed measurement by pickup or W
- GSM and PSTN modem management
- SMS communication
If you need more information about Sices generator protection relay and automatic transfer switch for generator
TTTT GLOBAL co Ltd,.
Address: Landmark 4 Building, Vinhomes Central Park, 720A Dien Bien Phu Str, Ward 22, Binh Thanh District, Ho Chi Minh City, Vietnam.
Website: https://ttttglobal.com/en/
Hotline: +84286 2728 334
Email: Info@ttttglobal.com
